Our pre-terminated cable solutions are manufactured in our quality-controlled manufacturing facility, using state-of-the-art processes and equipment. To offer our local and regional customers optimal quality, we guarantee <0.3dB insertion loss in all of our pre-terms that are supplied as standard with protection sleeve, pulling eye, and staggered distribution.

Available in five different options, including Mechanical Transfer Pull Off (MTP)

For MTP®/MPO systems, go here (ADD SUBLINK)

Simplex and duplex patch cords

Single and multi modes

To attenuate the optical sign in a link, you need HitekNOFAL attenuated patch cords; they are to be installed instead of the conventional patch cords in order to provide a constant level of attenuation with a return loss of <50 dB.

The attenuated patch cord can be used to replace the conventional cable assembly and attenuator combination. It is a compact, multipurpose, passive device designed to operate at wavelengths of 1310 and 1550nm.

Attenuated patch cords are provided with LC, SC, ST and FC connector styles as per customer requirements.

Multimode optical fiber links that use laser-based transmitters may be limited in bandwidth to values less than half those of the overfilled launch bandwidth.

HitekNOFAL mode-conditioning cable assembly eliminates differential mode delay (DMD) by moving the single mode launch to an offset position, increasing the mode fill, and reducing DMD.

Indoor Buffer Tube Fan-Out Kits are specifically designed for the termination of 6 and 12 Fiber loose tube cables. These fan-out kits provide the ultimate solution for those users who wish to field-install connectors. The kits provide the most compact, easy-to-install fan-out solution which requires no additional hardware or space than that required for terminating tight-buffered cables. The Fan-Out

Kit features a 900 micron fan-out assembly that is color coded to match the fibers you are terminating. The Fan-Out assembly is available for 6 or 12 fiber units in a length of 1.2m.

Singlemode & Multimode Pigtails

Bend Insensitive Purelight™ Pigtails

SC
ST
FC connectors
LC connectors
Boots
Fan-out tubing

A fiber optic adapter or uniter is used to mate two connectors together, usually mounted in a distribution panel or wall box. HitekNOFAL optical fiber adapters are precision-made to ensure perfect alignment of connectors and thus reduce insertion loss. Phosphor bronze sleeves are available for general use while the ceramic versions are mainly used in single mode low loss environments

SC multimode adapters
SC singlemode adapters
SC-APC singlemode adapters
MTRJ, MTP®/MPO adapters
Hybrid adapters
ST adapters
E2000 adapters
LC adapters
FC adapters

HitekNOFAL singlemode attenuators are used in communication systems to reduce optical power launched onto the photo detector. These high-performance devices are designed to offer accurate attenuation over a wide range of wavelengths. The plug type configuration allows them to be used directly on the end of a patchcord, which in turn is inserted directly into an adapter.

HitekNOFAL attenuators are available in FC, SC, LC, ST and MU connector styles with PC or APC finish providing the ultra low return loss. Our attenuators come to you from a world-class manufacturing facility backed by 10 years of experience in manufacturing passive and active fiber optic devices. Our attenuators have been widely used as part of implemented solutions in many environments, namely computer networking, telecommunications, and CATV, and drew total customer satisfaction and enduring loyalty.